Sascha
27.11.2005, 12:39
Hallo
Ich hab endeckt das meine Geforce 6600 wahrscheinlich einen Video eingang hat doch wie benutz ich denn hier ist ne anleitung doch die versteh ich nicht könnte mir jemand bitte helfen:
Hier die Anleitung :(
PHILIPS
SAA7108E
VIVO
Daughter Board
MANUAL
Philips SAA7108E PC-Codec module for Nvidia Graphics Accelerator
The SAA7108E is a new multi-standard video decoder and encoder chip, offering high quality video input and TV output processing as required by PC-99 specifications.
Video decoder
2 analog inputs, internal analog source selectors, 1x Y/C and 1 x CVBS
Fully programmable static gain or automatic gain control for the selected CVBS or Y/C channel
Two built-in analog anti-aliasing filters
Automatic detection of 50 Hz and 60 Hz field frequency and automatic switching between PAL and NTSC standards
Brightness Contrast Saturation (BCS) and hue control on-chip
Detection of copy protected input signals according to the macrovision standard. Can be used to prevent unauthorized recording of pay-TV or video tape signals.
Video scaler
Both up and down-scaling
Phase accuracy better than 1/64 pixel or line, horizontally or vertically
Independent scaling definitions for odd and even fields
Anti-alias filter for horizontal scaling
Video encoder
Digital PAL/NTSC encoder with integrated high quality scaler and anti-flicker filter for TV output from a PC
Up to 800 x 600 graphics data at 60 Hz or 50 Hz with programmable underscan range
Selectable cross-colour reduction to improve CVBS output
Down-scaling from 1 : 1 to 1 : 2 and up to 20% up-scaling
Support for hardware cursor
Programmable border colour of underscan area
Macrovision Pay-per-View copy protection system rev. 7.01 and rev. 6.1 as option
Chip specifications
Monolithic CMOS 3.3 V device, 5 V tolerant digital I/O ports
BGA156 package
Connector, cable and PCB
9 pin Mini din (Female) connector
One transfer cable from 9 pin mini din (Male) to 1 s-video out, 1 RCA Video out, 1 S-video in and 1 RCA video in.
6 layers PCB
1. Drivers support:
WDM drivers right now only support Windows 98 and Windows ME
New drivers will be released in the future
2. Cable:
1 to 4 cable specification:
Mini din 9 pin male head: connect to daughter board.
Orange mini din 4 pin female: S-video out
Green RCA jack: Composite out (AV-out)
White mini din 4 pin female: S-video in
Yellow RCA jack: Composite in (AV-in)
3. Bundle Application: (optional)
Ulead - Video Studio
Or equivalent software
Application program will have manual and installation guide included in the bundle package.
4. NVIDIA WDM Drivers installation guide:
4.1 Install from SmartInstall:
Put the DRIVERS CD in your CD-ROM Drive
Click “Additional installations”
Now shows “Additional Installations” window
Find “SP6620 Video I/O WDM Drivers” then click “Install”
System will now prepare to install drivers for you.
Click “Next” to start drivers installation.
System copy files.
Now installation complete, click “Finish” to Restart system.
After system comes up, you will find the “nVidia WDM Video Capture” listed in the System properties window. (The other WDM drivers [ like TVTUNER] is not useful with 6620 VIVO board)
4.2 Install directly:
The 6620 WDM drivers located at CD
\Util\6620\setup.exe
Or CD \drivers\Philips\6620\setup.exe
Execute the setup.exe file will show the same procedures as above.
Eof.
THX Alex
Trademark Acknowledgments
All brand names and trademarks are the property of their owners.
Ich hab endeckt das meine Geforce 6600 wahrscheinlich einen Video eingang hat doch wie benutz ich denn hier ist ne anleitung doch die versteh ich nicht könnte mir jemand bitte helfen:
Hier die Anleitung :(
PHILIPS
SAA7108E
VIVO
Daughter Board
MANUAL
Philips SAA7108E PC-Codec module for Nvidia Graphics Accelerator
The SAA7108E is a new multi-standard video decoder and encoder chip, offering high quality video input and TV output processing as required by PC-99 specifications.
Video decoder
2 analog inputs, internal analog source selectors, 1x Y/C and 1 x CVBS
Fully programmable static gain or automatic gain control for the selected CVBS or Y/C channel
Two built-in analog anti-aliasing filters
Automatic detection of 50 Hz and 60 Hz field frequency and automatic switching between PAL and NTSC standards
Brightness Contrast Saturation (BCS) and hue control on-chip
Detection of copy protected input signals according to the macrovision standard. Can be used to prevent unauthorized recording of pay-TV or video tape signals.
Video scaler
Both up and down-scaling
Phase accuracy better than 1/64 pixel or line, horizontally or vertically
Independent scaling definitions for odd and even fields
Anti-alias filter for horizontal scaling
Video encoder
Digital PAL/NTSC encoder with integrated high quality scaler and anti-flicker filter for TV output from a PC
Up to 800 x 600 graphics data at 60 Hz or 50 Hz with programmable underscan range
Selectable cross-colour reduction to improve CVBS output
Down-scaling from 1 : 1 to 1 : 2 and up to 20% up-scaling
Support for hardware cursor
Programmable border colour of underscan area
Macrovision Pay-per-View copy protection system rev. 7.01 and rev. 6.1 as option
Chip specifications
Monolithic CMOS 3.3 V device, 5 V tolerant digital I/O ports
BGA156 package
Connector, cable and PCB
9 pin Mini din (Female) connector
One transfer cable from 9 pin mini din (Male) to 1 s-video out, 1 RCA Video out, 1 S-video in and 1 RCA video in.
6 layers PCB
1. Drivers support:
WDM drivers right now only support Windows 98 and Windows ME
New drivers will be released in the future
2. Cable:
1 to 4 cable specification:
Mini din 9 pin male head: connect to daughter board.
Orange mini din 4 pin female: S-video out
Green RCA jack: Composite out (AV-out)
White mini din 4 pin female: S-video in
Yellow RCA jack: Composite in (AV-in)
3. Bundle Application: (optional)
Ulead - Video Studio
Or equivalent software
Application program will have manual and installation guide included in the bundle package.
4. NVIDIA WDM Drivers installation guide:
4.1 Install from SmartInstall:
Put the DRIVERS CD in your CD-ROM Drive
Click “Additional installations”
Now shows “Additional Installations” window
Find “SP6620 Video I/O WDM Drivers” then click “Install”
System will now prepare to install drivers for you.
Click “Next” to start drivers installation.
System copy files.
Now installation complete, click “Finish” to Restart system.
After system comes up, you will find the “nVidia WDM Video Capture” listed in the System properties window. (The other WDM drivers [ like TVTUNER] is not useful with 6620 VIVO board)
4.2 Install directly:
The 6620 WDM drivers located at CD
\Util\6620\setup.exe
Or CD \drivers\Philips\6620\setup.exe
Execute the setup.exe file will show the same procedures as above.
Eof.
THX Alex
Trademark Acknowledgments
All brand names and trademarks are the property of their owners.